{"product_id":"quality-quench-bright-200-copy","title":"Quality Quench Bright 101","description":"\u003cp\u003e\u003cstrong\u003eQUALITY QUENCH BRIGHT 101 \u003c\/strong\u003eis a clear, gold colored product designed to provide maximum cooling rates for austenitized steels. Its formulation guarantees good stability due to its accelerator package which will not stratify out at any temperature nor can it be filtered out. \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e can be used as a quench from temperatures as high as 1750°F and is especially suitable for developing maximum oil-quenched hardness in medium and low alloy steels. It is widely used as a quenching medium for carburized and carbonitrided work as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e is known as a fast quench oil, achieving rapid cooling rates in the nucleate boiling stage immediately following a short vapor phase. It also provides a slower cooling rate through the martensitic transformation range (Ms-Mf) than competitor’s fast quench oils. This ensures higher and deeper hardness levels are created without accompanying distortion of parts. Testing demonstrates \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e’s superior heat removal characteristics are the difference between partial and complete hardening in actual practice.\u003c\/p\u003e\n\u003cp\u003eOverall, distortion in oil quenched parts is proven to be caused by sluggish, non-uniform cooling rates. This is due to the thermal variations and mixed microstructures in the initial stages of the quench which slower quench oils produce. A fast uniform quench is especially important in batch-type carbonitriding furnaces to provide all portions of the load becoming evenly hardened. The quenching rate provided by \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e was designed to satisfy this requirement. Additionally, this low viscosity quench oil drains off parts quickly resulting in less drag-out and is characteristically easier to wash off work after quenching. If left on, it provides a thin film of protection from rust.\u003c\/p\u003e\n\u003cp\u003eYou can use \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e with confidence. Your parts will achieve maximum oil quenched hardness with minimum distortion or cracking. Lastly, \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e will produce exceptionally clean, bright work when used within its recommended temperature range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOPERATION:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBath Parameters\u003c\/p\u003e\n\u003cp\u003eTemperature: 77 – 180oF (25 - 82°C) (open tank operation)\u003c\/p\u003e\n\u003cp\u003e77 – 130oF (25 - 55°C) (vacuum operation)\u003c\/p\u003e\n\u003cp\u003e200oF (93°C) Max (under protective atmosphere)\u003c\/p\u003e\n\u003cp\u003eVelocity: \u0026gt; 100 FPM (0.5 MPS)\u003c\/p\u003e\n\u003cp\u003eImmersion Time: As required for appropriate metallurgical transformation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEQUIPMENT:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElectrical immersion heaters used to raise the temperature of the oil should not exceed 10.0 watts per square inch in a well agitated environment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCONTROL:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe quench speed of \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e can be obtained through testing by Quality Oil \u0026amp; Gas Co. Test method ASTM D6200 - Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis is performed on as-used samples submitted by customers. If as - used \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e quench speed becomes slower resulting in lower hardness levels, a 5% addition of QUENCH OIL ACCELERATOR by volume of the quench system will restore the speed, increase hardness levels and reinforce the anti-oxidizing agent in the product. \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e may need centrifuging or filtering depending on sediment dragged into it during production.\u003c\/p\u003e\n\u003cp\u003eSediment level should be maintained at \u0026lt; 0.5%. Absorption of furnace atmosphere can cause the flash point of \u003cstrong\u003eQUALITY QUENCH BRIGHT 101 \u003c\/strong\u003eto become lower than 340oF (171°C) resulting in poor quenching characteristics or create a possible fire hazard. Should this occur, de-gassing the oil at temperatures between 250 - 275oF (121 - 135°C) will remove the trapped gases. Agitation during the de-gassing process is recommended. All efforts should be made to avoid water contamination of \u003cstrong\u003eQUALITY QUENCH BRIGHT 101\u003c\/strong\u003e, because it will cause very erratic quench characteristics as well as posing a serious fire hazard. Water contamination can be removed from the oil by slowly elevating its temperature to 250oF (121°C) for two hours with agitation.\u003c\/p\u003e","brand":"QUALITY OIL \u0026 GAS COMPANY","offers":[{"title":"55 gallon drum \/ 17","offer_id":52892344222012,"sku":"16910155","price":806.85,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/2738\/3868\/files\/quality-quench-101-in-industrial-quench-furnace-setting_f4999779-e3ef-497d-9b69-99a4ba0f5498.png?v=1773842748","url":"https:\/\/qualityoilandgas.shop\/products\/quality-quench-bright-200-copy","provider":"QUALITY OIL \u0026 GAS COMPANY","version":"1.0","type":"link"}